Thursday, December 13, 2012

Blast from Bob

Bob gives me an update.  He is doing some interesting work with the car and taking it to the next level:
 I started to talk about the charger issue.  I had contacted the Zivan rep and got a cold shoulder from them.  I designed my own charger and got it working after a few blown transistors.  My goal was 135 volts max and 10 amps max and the charger achieved both of those goals.  The packaging was rather crude because I used a discarded chassis from some unknown piece of electronic gear.  It was so bulky that I was unable to close the hood while charging. Right after I got that thing working well, I stumbled upon the forum called diyelectriccar.  Under the heading about charging, I found other people unable to get Zivan to properly convert their chargers to lithium.  One person actually went to the extent of designing a bug to replace the existing processor.  He was willing to sell copies of this bug so I bought one.  He even included a sample program which he had used for his car.  I don't know much about programming, but since all I had to do was change a few lines of code to match my battery pack, I got the Zivan working for lithium! I put my design aside and just chalked it up to experience.  Another little problem I solved involved the lack of a reliable parking brake.  Using the chocks has been unhandy.  I lost one when I drove off without it.  The solution is a brake club.  Rather than describe it, I'll send a picture.  The club goes between the pedal and the base of the seat.  It goes over center and latches.  Another latch situation came up.  The 12v battery went down to the extent it wouldn't operate the relay to energize the main solenoid.  This is a situation which could leave you stranded.  This relay also connects the DC-DC converter from the main battery to the little one.  The emergency fix for this is to drill a small hole in the the side of the DC relay, turn on the key, and insert a toothpick into the hole against the relay armature and push.  The relay will hold because the small battery is being charged by the big battery.




I hope to get down there and film a ride sometime.  It would be quite a different ride, I think.

Tuesday, April 26, 2011

Bob's ups and downs...

Latest update:
I've been waiting for warmer weather for top off cruising and it has finally arrived. My next door neighbor and I went to see the B-17 at the airport. Silver cruises nicely at 65 on the freeway in 4th gear. No need for 5th. Coming home on the expressway and poof! All the lights went out. Another tow truck ride home. I told the driver the car was an experimental model. At home, the fix was easy. Another spade lug broke off. It needed a replacement so the tow truck was not a waste. These 12v problems could happen to a car with any kind of engine.

I'm working on a charger design so I will have something here when I send the Zivan in to get "profiled". I found very little on chargers to copy so I am starting from scratch with parts from Digikey. I'll let you know how this works out.

In the meantime I really like the way the car drives and handles. If I ever get the urge for more power and range, I have plenty of room for more batteries.

Bob

Sunday, March 20, 2011

Bob Going Lithium

Bob sent me an update on his progress converting the car to lithium batteries (sorry it took so long to post it, Bob):

I found a pair of rear trunk torsion bars on ebay. To install them, I needed to split the rear battery box and remove the rear half. Because I had the batteries out, I decided it was time to get lithium. I decided that 40 cells would have nearly the same voltage as the 20 lead batteries. I ordered from Calib in Pomona and after a little wait, they were delivered from their stock. They were in three boxes on a pallet, and the UPS driver moved them with his manual fork lift right to the rear of Silver II. Back to the torsion bars. Installation requires two tools; a pry bar and a close-fitting pipe. The hinge is first removed and the pry bar is used to bend the spring to the rear under the corner of the engine cover. The pipe then holds the end of the spring with an assist of block of wood leaning against the underside of the corner of the engine cover. The hinge can be easily reinstalled. This is a one man job with the right tools. It is nice to be able to open and close the rear trunk without a broomstick. The saddle bag boxes are no longer needed so I have a full trunk to use.
I will include a few pictures of the lithium installation. Calib sent me the wrong hardware so I can't complete the wiring. One picture shows how I used the copper strap, modified, to terminate each box.

Wednesday, January 12, 2011

Bob Update: Number 3

I redid the charging configuration on paper and I'm about to test it. It relies on the aux contacts on the charger itself. The charger is Italian and the translation is not clear. I'm hoping that aux 2 closes as the trickle phase begins. That phase is not desired for lithium and I want to us aux 2 to stop the charging. Do any of your contacts know about this? I found a recessed male plug on ebay and I'll be using that.
The 914 tach would not work with an ordinary square wave coming from the tach board that I built. I think I told you that I modified the tach itself to get it to work. I was not satisfied with that, so I bought another on ebay and changed my driver until it did work. The design is such that the output looks a whole lot like the signal from a distributor. I don't know if all tachs need this, but I'm going to look into it.
I've been driving the car a little. My impression is that it does not feel like a Porsche. Every other one I've had felt light and nimble.

Could this be the lead sled I've heard about? As soon as I can verify the charger, I'll order lithium. I have a source that has a pretty good delivery schedule. The voltage for 40 lithium should be about the same as 20 lead.

Bob

Saturday, December 18, 2010

Bob Update: Number 2

I believe I have enough side issues corrected to do some driving. The turn signals work. The ignition key is installed. That took several days because it required modifying the column. The 914 has early versions and late versions, and they do not interchange. I bought a late column on ebay and the mounting holes don't match. The late switch and lock won't go in an early column without severe modification, which mine now has. The tach is working. I made an optical pickup and mounted it on the back face of the motor. there was only one hole available so I hope that is enough. I pre tested the output and got a perfect square wave going to the tach, but the tach still didn't work. I took the tach apart and modified it and now the tach works. I got lucky here because I had no schematic and was working blind. I wish I did have a schematic of a VDO tach. I'm not done with this because I want to make an adaptor which works without having to modify the tach itself. The next big hurdle before I order lithium is the charger. It has the wrong profile for lithium and I don't even like it for lead. My approach is current limit in initial phase, voltage limit, then stop when the current reduces to 10 percent of it's initial value. This for lead and lithium. This approach is even good for nicd and nimh although it is seldom used this way. Next, the low voltage schematic that was furnished with the kit is unreadable in it's present form, so I redrew it. I discovered what i think is an error and after I make some changes, I'll comment further.

Bob

Saturday, November 20, 2010

Bob Updates: Number 1

I'm dating this for when Bob sent the e-mails. He continues to update me about the car. This was the first one:
I thought I would bring you up to date on the electric car. First, the turn signals haven't worked since the car was painted because the painter crossed the wires on both front turn signal lamps. I bought a flasher relay from a Porsche parts distributor and it was not compatible with the 914. I opened it up and modified it and now the turn signals work. I took the speedometer apart and found where the odometer was slipping. I assembled the slipping part with loctite and it is working for now. If this repair doesn't hold, I will do something more extensive. The replacement key-lock assembly is correct, but not for this early car. I bought a steering lock assembly on ebay and put the lock with it and it works OK but will not fit the steering column. Now I have a later model steering column coming from ebay.
I found a switch under the dash with a broken handle. I replaced the switch and now the antenna goes up and down. I'm going to modify the radio so the antenna goes up when the radio is on.
I found the forward shaft of the Warp 9 is tapped 1/4-20 so I'll be able to mount a cam on the end of the shaft. There is a tapped hole 1 1/4 inches from the center to mount an optical pickup. I haven't built any hardware yet but I should be able to make this work. I noticed the kit instructions had you tie the tach wire to a terminal board for this use.
I have improved the engine bay lid somewhat but have not yet finished this. The kit instructions called for parts which I couldn't find in the box.

After I get the tach working, I'll start shopping for lithium batteries. I'll keep you posted.

Bob


Obviously, Bob is doing the things I was incapable of doing without a long learning curve, so I think the car is in good hands.

Sunday, November 7, 2010

Under New Ownership...



Well, I feel like I've done what I set out to do and I felt like it was time to sell the car. Bob (above with his wife Mary as we dined at Coco's in Pismo Beach) is the new owner, a fellow alum of the University of Illinois, a retired engineer and general tinkerer. He plans, among other things, to put Lithium batteries in, which should improve performance significantly. Hopefully, he will keep me updated and I can occasionally add posts this site. Thanks to all those who have followed this blog over the past couple of years. I hope you have found it entertaining and helpful. I will probably take up some new crazy project soon and I'll probably have a blog for it. Until then, I will sign out. Best of luck to all of you electric car converters!
Cheers,
Steve

Monday, October 4, 2010

Vehicle is for sale!

I feel like I've done what I've set out to do in completing this project and I am putting it up for sale, so I can start some new crazy project. Here is the e-bay listing:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=320599517320#ht_750wt_966

Saturday, August 21, 2010

Maximum Range



In this video I drive a 6 mile course repeatedly around town until I run out of charge. Not a particularly exciting video other than a little drama at the end, but I now know the range. For those who wish to dispense with the watching, it was just over 50 miles. I would say it gives a comfortable range of 20 miles to a destination and 20 miles back (for a 40 mile round trip) to be on the safe side. I was hoping for a little more, but that is quite functional and a reasonable range.

Monday, May 10, 2010

Maximum Speed of this Electric Car

I was surprised to get it going this fast:

Tuesday, January 12, 2010

My First Ride: Edna Valley






I still need to do a few things, but the car is running nice, I think.

Saturday, November 14, 2009

Getting her road ready

I put the seats in and the hoods on today, then filled the tires as best I could with a bicycle tire pump. The electrician set up a dedicated plug with a higher amp threshold for the circuit breaker as a dedicated "fueling" station for the car, so it was charged up and looking sharp. I took her out for another test run, still in the neighborhood, and snuck it up near 40 mph (don't tell my neighbors) without it breaking a sweat. The front end is still bottoming out, even with extra air in the tires and I discovered the reason. I had thought that the Cal Poly guys who did some work on it had put in the new heavy duty front shocks that came with the kit, since I hadn't seen those around, but they were buried behind the hoods leaning against the wall. I'll try next weekend to put those in and I think the car will be highway ready. For now, I might try to take it to the gym a mile from my house tomorrow, but I don't want to overstress it without those shocks.

Sunday, November 8, 2009

On the road! (sort of)


I was out of town this week, but Jerry "The Car Doctor" (pictured to the left) was on the car all weekend and when I got back today, he had it off the jack stands. I turned her on and rode her around the block a few times. My initial impressions: The car ran pretty well, comparable to when it had a gas engine, although I was limited to about 30 - 35 mph in my neighborhood which I achieved easily in 3rd gear. I think it will go highway speeds quite easily when I put it to that test. At this point, I need to get both seats in and the two trunks and there are some minor finishing touches Jerry will do after Thanksgiving. The suspension is a little tight and the car bottomed out up front at the bottom of our street where it met the cross street. The front tires are a little flat, so pumping those will probably help with that and I'll see if I need stronger suspension there. It was getting dark and I don't have a camera yet, but hopefully I can get some good film of the ride soon. The other issue involves charging. The charger worked for awhile, but then tripped the garage electric circuit breaker, so I can't recharge it until I can get a 20 amp breaker put in there.

Wednesday, October 14, 2009

Wheels are Turning!

We had a good-sized rainstorm this week, so I wasn't expecting Jerry to drop by. Imagine my surprise when he was waiting in the garage with a smile on his face. With the car still on jacks, he started it up and ran the wheels forward and backwards. It's only a matter of time before we'll have it on the road, now! A few finishing touches with the electrical system when Jerry is back in town and I'll put the seats and hoods back on and make a run.
Jerry had run into a few problems getting the controller to work and eventually called ElectroAutomotive. He actually spoke with Mike on the phone and Mike talked him through the wiring, so apparently the customer service of EA has improved. If anyone still checks out this blog, I hope to be on the road with the car in the next couple of weeks and will try to film the occasion (I don't have a movie camera at the moment, but this might be just the motivation I need to buy one).

Tuesday, October 6, 2009

Could it happen?

As anyone who has been following this blog knows, it has been a bit dead in the water for some time now. So it's time for an update. Jerry the "Car Doctor", in a flurry of inspiration has made some serious ground on the car and hopefully it will be running in the next few days! I will keep you posted. He called me over the weekend and said, "Let's get the batteries and finish this." So the batteries arrived today and he loaded them in.
(I know the blog started out with easy instructions for the beginner and I apologize that I haven't had the time or talent to complete the job myself, but below are a few updated pictures).


This is the front with the charger folded up. Jerry plans to run the wire to the front behind a flip-up license plate to attach the charger.


This shows the charger folded down. The charger is very different than the one found in the EA instructions and was easier to install (according to Jerry)




And this is the rear loaded up with batteries. The suspension seems good. It's a little tight in the back with the replacement coils from EA. I can't wait to see how it runs. This blog now reminds me of an old comic strip someone had hanging up at their desk when I worked as a computer programmer. It showed a complicated flow-chart all leading to a step that said "A miracle happens" before getting to the finished program.

Wednesday, May 6, 2009

The Doctor is in...

The "Car Doctor," that is. Jerry, a local auto mechanic took an interest in my electric car project and offered to put in some time on it. Jerry has worked on electric cars in the past, mostly industrial vehicles, so he has a good knowledge base. He has come here a couple of days and has made more progress than I could have in 10. I had almost sold the car off, but this breathes new life into it. I'll post pics, soon. Obviously, I won't be able to give as much detailed instruction, but I will be happy to field questions to Jerry and will leave a link for him.

Thursday, January 1, 2009

New Year: Resolution

No takers on the car and I have a little more time these days (not much), so I'm going to give it another go. I looked things over today and put in a few grommets. There are some parts and tools that I can't find, but I will do as much as I can. It's a little difficult, because I've been away from it so long and I don't have much momentum or continuity, but I'm at least feeling a little motivation. Anyway, Happy New Year to all and hopefully I'll be back on here with posts of my progress. For the record, I'd like to thank the people who e-mailed me and encouraged me to get back in my garage and finish this puppy.

Sunday, November 2, 2008

Anyone interested in Finishing this Project?

I am overwhelmed with a new business and don't have the time in the foreseeable future to work on this car. If you are interested in buying the car or if you have some expertise and would like to work on it for a fee, let me know.

Saturday, May 10, 2008

Lifeline!

Since I have not had time to work on the car myself and don't anticipate being able to anytime soon, I decided to try and enlist some help. A few engineering students from the local university have agreed to help finish the car. It is nice to have some new blood and enthusiasm for the project. These guys appear to be quite capable, and they work fast. I'll try and post up some pics as they come. I should note to anyone that has the new engine mount for the warp 9 with the dual shaft from ElectroAutomotive, the mount and the transmission adaptor did not line up properly, leaving the mount an eight of a turn from the bottom. It would appear that this problem was fixed on my end by the students noted above, by drilling a couple of extra holes in the mount. I'll notify EA so they can fix future mounts.
Anyway, I'll try to post pics as much as possible, but I will often not be around while these guys are working on it.

Monday, February 18, 2008

Sorry for the slackery...

I can't blame it on ElectroAutomotive. I have been sidetracked the past couple of months. My wife and I just acquired a yoga studio and it has taken up all of my time. I hope to get back at it in a couple of weeks.